Termékek a csomagolás (180)

Heat-sealing roller FP802/803 with constant heat which allows the sealing of bags and heat-sealable materials. This roller allows you to make seals with different shapes (square, circular, etc.) according to your needs. Once the roller has been switched on, the operator must wait for the roller to warm up for about 10 minutes. The temperature is adjustable via a potentiometer and reaches a maximum of 200 ° C. There is no graduated scale. The temperature must therefore be set following practical tests on the material. The use is manual. The pressure, the sealing time and the temperature must be managed by the operator. The sealing result depends exclusively on its ability and therefore the result can vary between seals. The coating of the anti-adhesive Teflon roller allows to seal bags in polypropylene, polyethylene and laminated materials. It is supplied complete with a mat in silicone material which, positioned under the product to be sealed, is the ideal match for sealing. Sealing width:mm. 5-10 Temperature:constant - maximum 200 °C Max sealing thickness:300 my (2x0,15 mm)

MINI TWIST 140-160 CABLE - SEALING MACHINES WITH TWIST BAND Twisting manual machine, designed and built to tie different kinds of product, with a twistband wire. It is mode in varnished steel assuring a long life. The MINI TWIST is user-friendly and astonishes for its simplicity. It makes possible a grow of productivity of the worker himself. The machine is feeded by a reel of plastic wire, so-called "Twist band" which has a metal wire inside. Example model:140 Twist Cable Working:pneumatic Air consumption:50 Lt. / min Air pressure:6 bar Machine cycles:30 pcs. / min. Autonomy:About 5000 sealings Type of seal:Twisted lace Reels lenght:600-800 mt.

Wrapping machine with turntable FP ECO ROLL for wrapping carriages (roll container), with hooking / manual cutting of the film and buttons for ascent/descent of the reel, guide carriages, foot operated mechanical lock, loading ramp for pallet trucks, progressive starting device. (Machine CE). Maximum load:Kg. 2000 Rotaring table speed:4 - 7 rpm Maximum dimensions trolley:mm. 800 x 1200 (600 x 1400) Max trolley height:mm 2200 h (2400 mm with optional) Turntable diameter:mm. 1500 Height of turntable:mm. 75 Power supply:380V - 50Hz Installed electric power:Kw 0,4 Machine dimensions:mm. 1500 x 2050 x 2450 h Weight:Kg. 35

Rotating table for handling or storage of boxes, with large plan diameter 1500 o 2000 mm and capacity 200 kg. Robust. ROTATING ACCUMULATION TABLE - DIAMETER 1500 mm or 2000 mm The rotary table of accumulation is generally used in the final part of the packaging lines and facilitates the discharge of the packaging machines, facilitating the sampling operations by the operator. The table can be equipped with containing side rails and, on request, reinforced to carry heavy weights. OPTIONAL The plan may be made with customized table diameter and a different rotational speed.

The shrink tunnel, equipped with temperature adjustments, height and speed, is incorporated in order to make the machine compact and versatile, suitable for series production. The welding time is electronically set and the absence of fumes is ensured by teflon-coated blades. The sealing bar motorized, equipped with security system, the closed circuit cooling plant and motorized scrap-winder, are part of the standard equipment of the machine. FEATURES Digital panel with 6 programs Descent sealing bar manual or automatic Discharge conveyor for product Legs with locking wheels Only welding and welding + retraction Sealing bars with closed-circuit cooling system and patented safety system Emergency switch Teflon coated sealing bars Electromechanical automats Welding speed automatic controller Motorized conveyor belt with adjustable height Motorized scrap-winder Air flow shrink tunnel swiveling Adjustable temperature with electronic temperature controller Sealing bars size:mm. 550x420 Support plan size:mm. 500x380 Max pack height:mm.200 Tunnel entrance size:mm. 440 x 240 h. Power supply:380V Installed power:5,7 kw Max reel width:mm.600 Hourly production:900 pcs machine size :mm.2330 x 730 x 1380 h Package Size :mm. 900 x 2400 x 1550 h Net/gross machine weight:287 /343 Kg

SEALING MACHINE/BAGGING MACHINE MOD. SUPER - FOR MASSIVE PRODUCTS Machine consists of a loading tube on which a tubular film with a width of 50 cm is fitted. and a manually operated sealing bar. The loading tube is slightly inclined and facilitates the sliding of the product inside the film, without causing sudden falls. By lowering the sealing bar a perfectly sealed bag is obtained and at the same time the bottom of the next bag is created, a hot cutting system separates the two packages. The SUPER bagging machine can be positioned at the entrance barriers of hypermarkets, supermarkets, shopping centers, to reduce theft, small objects but it is also widely used for packaging technical items, clothing, linen, etc. Length of sealing bars:mm 520 Sealing width:mm 2 Loader capacity:30 m film HDPE Max. thickness LDPE polyethylene:60 µ Max. thickness HDPE polyethylene:30 µ Tube size:about cm 30 x 15 Type of sealing :impulse

ME 300 SI SHOP SEALER IN STAINLESS STEEL , sealing up to 5 mm This unique stainless steel portable impulse sealer makes it possible to seal bags rapidly while holding the bag with two hands. To activate the sealer the user just needs to depress the work table. This versatile sealer allows the user to package more products efficiently and quickly, they can be used on table top or wall mounted to do vertical sealing. Makes a strong 2,5mm wide seal (wire changeable) on material up to 0,15 mm. x 2. Rust-proof stainless steel body. Seal lenght:mm. 300 Seal width:mm. 2,5-5 Material sealable:PE-PP

Pneumatic clipping machine suitable for closing bags with twistband (plastic band with one metal core), max. diameter of binding mm. 11-28-38. Bag sealer mod. MINI TWIST working with twistband wire (plastic wire with metal core). Robust and secure machine, entirely made of painted steel suitable for closing packs with easily opened plasticised wire. The parts in contact are entirely made of aluminum. Available in 3 models. Example model:TWIST 100 Working:pneumatic Air consumption:50 Lt. / min. Air pressure:6 bar Machine cycles:40 pcs./min Autonomy:about 6000 clips Type of seal:Twisted lace Length reel:600-800 mt.

TABLETOP VACUUM MACHINE - 1 FRONT BAR LENGTH 450 mm Professional bench vacuum machines in stainless steel, which can be set from the panel with 10 customizable programs. Through the convenient display it is possible to view the various parameters of the vacuum. The display shows the need for oil change with a special message. An electronic sensor of last generation detects the degree of vacuum obtained inside the chamber. All FPMV models are endowed with a safety system against the risk of sealing bars overheating. Vacuum capacity is 99,9%. Available models: FPMV 45 1BF - 1 450 mm front bar - 20 mc/h vacuum pump - without gas FPMV 45 1BFG - 1 450 mm front bar - 20 mc/h vacuum pump - with gas Only when ordering is it possible to request the integrated printer for printing an adhesive label showing the packaging data. Sealing bars length:mm 450 Chamber size:mm 466x405x117H Nr. gas nozzles for bar (only in the version with gas):2 Vacuum pump:20 m³/h Cycle time :24 seconds Air re-entry time:8 seconds

Sealing Pliers designed for welding packaging of all sizes in the barrier material (polypropylene laminated paper and aluminum). Thanks to its small size and limited weight can be used anywhere. The pliers dual hot bar solder is available with a width mm. 300 and mm. 400 , furthermore the welds are repeatable side by side at any length. The temperature of the sealing bars is adjustable from 0 °C to 200 °C using a temperature controller positioned on the plier. Thanks to the coated bars with antiadhesive teflon, it is also possible to weld polyethylene bags of high thickness. (Min 100 my each side - my 250 max each side) Example model:ME 300 DH Seal length:mm. 300 Seal width:mm. 12 Type of bars:longitudinally ribbed Weldable materials:barrier

Clipping machines HR20/23 with ring closure for the assembly of wire mesh, springs for mattresses, fencing and packaging. Aluminium body, rubber grip and return of pneumatic gripper (without spring). The closure diameter of the of the ring depends on the type of material to be clipped. The clipping machine HR 20 and HR 23 are suitable for example for fences and to close bags and nets. The sealing of the clipping depends essentially on the type of material that is going to seal. On soft materials, such as on a net bag, the clip remains locked. On stiffer materials or on fences, the clip guarantees tightness but may not prevent the wire from sliding. Example model:HR 20 Storage capacity:200 rings Width open loop (external):mm 19,3 Closing diameter:from 4,8 to 6,8 mm Type of ring used:HR 20 with wire diameter 1,50 mm Working pressure:6 bar

The ME-FD double Impulse sealers with pedestal incorporate twin elements (top and bottom) for heavy-duty applications and can accommodate up to 0.5mm material. Makes a 5 mm wide seal and fuses the material from both sides. Ideal for sealing large heavy bags. Also equipped with slide switch to select single side sealing or double sides sealing. By having a foot control, the hands are free to feed the machine. Units come complete with pedestal, stand, adjustable working plan and adjustable foot control. The sealing time is adjustable with a timer and is indicated by a light. Easy and simple to operate. No pre-heating required. Maximum seal thickness 0,25 mm. (0,50 mm total). Max. seal length:mm 450-600 Seal width:mm 5 Sealable materials:PE-PP-AL/PE

Machine suitable for the closing of bags with height 200 to 700 mm and max weight. 10 kg. The system with two pairs of heating elements and belts PTFE allows the closing of bags made of polyethylene, polypropylene, cellophane, coated paper, laminated aluminum, etc .This particular welding system is strongly recommended in the presence of bags with high thickness and bellows side. The temperature is controlled by two electronic temperature controllers and the feed speed is adjustable. The distance between the solder and the edge of the bag is 30 mm. The welding head and the conveyor belt are independently adjustable in height through flyers. The machine is equipped with rotary solid ink marker and interchangeable characters (max. 20 characters with height 5 mm.). The system works with inked rollers for easy reading and comes complete with photocell to do the marking in the desired place. Sealing width:mm. 8-10 Max product weight:10 Kg Temperature set:0° - 250° Weldable material:PP –PE-Coupled

CARTON SEALER MACHINE MOD. FP 9037 - UPPER AND LOWER BELTS The two heads simultaneously apply a strip of tape taping above and below the box. Ideal for close fixed format boxes (with constant height and width). Structure of the body in painted steel. Movement of boxes happens via two lower dive belts and two upper drive belts, adjustments for the different formats are carried out using flywheels. The machine is equipped with idle rollers 400 mm length for loading and unloading. The machine is equipped with wheels with brake. Dimensions of the boxes to be taped (WxLxH):Min 200 x 150 x 100 mm Max 500 x unlimited x 500 mm Tape width:50 mm (75 optional) Type tape:Polipropilene - PVC Operation speed:20 m/min Belt drive:Upper/Lower

PNEUMATIC SEALER CP 500 Electropneumatic sealer with double sealing impulse bar with (the resistance heat for a few seconds) suitable for closing packaging polyethylene, PVC and polypropylene, coupled aluminum, etc. It has four positions of voltage to the sealing bar, timer for adjusting the welding time and timer for the cooling time. The double sealing bar (top and bottom) welded from 3 mm allows the closing of envelopes very thick, laminated bags and bellows. The closing of the bars takes place by a pneumatic cylinder unit with pressure and pedal control. Maximum thickness weldable 0.25 mm. The CP 500 can be easily oriented from 0 to 90 degrees. Max. seal length:mm. 600 Seal width:mm. 3 Max thikness:mm. 0,25 Sealable materials:PE-PP- AL/PE Dimensions:mm. 320x500x270 h.

Bench cutter with lever, portable, suitable for cutting of cardboard corners. Equipped with ergonomic handle with safety latch to lock it when the cutter is not in use and a small compartment for storing rulers, blades, markers and pens and leave the workbench ordered. Operation is very simple, simply enter the portion of the corner you want to cut into the slot and pull the lever down. The cutter is used during packaging operations to cut safety corners, normally 2 meters long, into smaller pieces to be placed on the corners of boxes and pallets to strengthen them and protect them during transport. Dimensions:mm. 530x210x350/830h closed/fully open lever Lever lenght:about 500 mm Corners size:maximum mm. 100x100x10h.

FC LINE HOOD PACKAGING MACHINE The FC LINE has a fresh design and solid structure, an electronic of new generation, and several other technical improvements which improve even more the performances of these machines. Three models are available with a support plan of mm. 400x250x200h - mm. 520x390x250h - mm. 580x780x250h. The dimensions of the support surface are to be considered with the closed hood. The volume cannot be completely filled by the box or by the product to be packaged as space must always be left for the passage of hot air around the product. Example model:FC 76 Film:PVC – PPL Max output (p/h (pph)):200-300 Useful sealing bars dimensions (mm):550x420 Internal hood volume (mm):520x390x250h Max film roll dimensions (diameter) (mm):D.250x600

STAINLESS STEEL VAC SERIES New series of professional external vacuum packing machine external for counter. Very robust as made entirely of stainless steel. Operation with embossed envelopes or three layered. Perfect for use in restaurants, catering or domestic environment are supplied with CE certificate and manual of use and maintenance. Main features: Working cycle fully automatic, space-saving, self-lubricating pump. Sealing bar dimensions:mm 330 or 430 or 530 Air suction:l/min 10 or 20

Place the pallets (EPAL) using a simple hand pallet truck, attach the film to the pallet base and press the start button. The table starts to turn, after a few turns, press the coil rise button and hold it. When the coil of film reaches the top of the load stop the machine or press the down button to perform the double winding. Attention: the pallet must not have the inner crosspieces on the side of the transpallet. STRETCH FILM FOR WRAPPING MACHINES: The film normally used on winding machines is 23 my standard in rolls of approximately 16 kg. With 1 roll of film you are able to wrap an average of 60 pallets. The film is also available in white 30 my, suitable to protect the contents of the pallets from sunlight. The white film is opaque and can be used to hide valuable goods during transport. The type of films supplied by us is of premium quality and is suitable to be used on our machines. We recommend using only top quality film MAX CAPACITY:Kg. 1000 (1500 with optional) Turntable diameter:mm. 1500 Max. pallet dimensions:mm. 1000 x 1200 Turntable speed:4 - 7 rpm with inverter Turntable height:mm. 90 Power supply:380V - 50Hz Installed power:Kw. 0,6 Dimensions:mm. 1500 x 2500 x 2250 h

BASE CARTON SEALER B52/B670/B820 Base for the closure of only the funds of boxes by means self-adhesive tape. Structure of the machine body made of sheet steel bent, bolted and painted, the movement of the cartons is done by two side drive belts driven by a single motor, adjustments for the different formats are made through flywheels. The machine is equipped with 4 wheels with brakes. The taping bases can be used both in semi-automatic lines with operator and in automatic lines or with box formers. The GEM B52 model is available in the version without guards for semi-automatic use or with side guards for insertion in the line. On the other hand, the B670F and B820F versions are only available with side protections for use in automatic lines or in combination with an automatic box former. The GEM B52 models can also be made of stainless steel. Example model:GEM B52 Boxes width min.:100 mm with 50 mm head/150 mm with 75 mm head Boxes width miax.:500 mm Boxes length:Min. 150 mm - max. unlimited Boxes height:Min. 100 mm - max. 500 mm Tape width:50 mm (75 optional)

Machine suitable for closing bags mm height. 200 mm. 320 and max weight. 5 kg. The welding system belt PTFE allows closing bags made of polyethylene, polypropylene, cellophane, coated paper, laminated aluminum, etc.. The temperature is controlled by an electronic controller and thespeed is adjustable. The distance between the sealing and the edge of the bag is 10 mm. The sealing head is adjustable in height. The machine is equipped with a marker rotary heat and interchangeable characters (20 characters max height 5 mm.), The system works with inked rollers for easy readingand comes complete with photocell to make a mark at the desired point. Max products weight:5 Kg Seal width :mm. 10 Seal temperature:0° - 300° Sealable materials:PP –PE-coupled

Strapping tools for metal strapping 10-13-16/18-19-20 mm manual for flat surface, joint with copper-plated steel seal. Simple and cheap, is used for strapping packages and pallets of any size. This strapping tool requires a flat surface with a minimum length of 200 mm. In general it is not recommended in case of high productions. The sealing depends on the type of material and strap. Strap quality :Steel strap standard / blued R. Max 850 N/mm2 Strap width:mm. 10-13 -16 Tickness strap:mm. 0,5 – 0,6 Joint type:Metallic seal

2 side sealing bars lenght 600 mm, vacuum pump 40 m3/h. Also available with MAP - Vacuum packaging machine with trolley and double lateral sealing bars, made of stainless steel (AISI 304). Equipped with digital panel and volumetric electronic sensor for the steady control of vacuum. Volume increased chamber and convex lid for a max eight of 250 mm. The vacuum pump of 40m3/h with three-phase 380V motor ensures high productivity. The two side bars with a length of 60 cm allow to pack more bags simultaneously (on one or both of the bars), reducing packing times. Is however possible to use it with a single bar. The DZ 600 2S packaging machine is also used for the vacuum seal and the jars of creams, jams, etc .. The vacuum chamber utilizes specific smooth envelopes for vacuum. Vacuum machines can be equipped with gas injection system (MAP). Each sealing bar is equipped with two nozzles which introduce gases in different quantities, so the machines are suitable for the packaging of one single use for each sealing bar. Sealing bars length:mm 600 Number of bars:2 laterals Vacuum pumps:40 mc/h Work cycle:about 30 sec Useful width:mm 530 Useful lenght:mm 620 Useful heigth (chamber + lid):mm 160/250

The pneumatic sealing machines QF 600/800 LS are widely used in chemical industries, food industries, animal feed, etc. for sealing bags in plastic material of every kind, even of high thickness with max width of 600/800 mm and weight max of 50 kg. The use of compressed air to the closing of the sealing bars allows to adjust the welding pressure and ensures a high and constant quality, the closure of the bars takes place through double button (dual control of security). The welding machines QF-600/800 LS are installed on a stand with wheels and comes complete with height-adjustable idle roller conveyor for handling bags weighing up to 50 kg. Seal length:mm 600/mm 800 Seal width:mm.10 Sealable materials:PE-PP- AL/PE

The manual table clipper FP HR PS II is a small, handy and versatile table clipper with lever operating. It’s ideal for closing bags and net sacks where the number of packaging is not very high and therefore does not justify the purchase of a pneumatic machine. All parties have an anti-rust treatment and are easy to clean. Use aluminum clips diameter 2 mm, internal width 6 mm and length 13 mm, bars of 50 pcs. The clipper FP HR PS II is also used to close bags of mozzarella or other products containing liquid as it makes an airtight seal. Storage capacity:N° 150 clips Packaging max. diameter:mm 6 Clipper dimensions:mm 415 x 162 x 765H

Manual eyeleting machine suited to the insertion of the eyelets on boxes of pasta, biscuits and food in general. The eyelet is very used to attach the jumper on which are printed all product-related information. Usable eyelets:eyelets diameter mm. 7 and 9 Total Length:mm. 220

These machines are suitable to the closure in horizontal bags with maximum height mm. 300 and max weight. 5 kg. The welding system with belts PTFE allows the closure of bags made ​​of polyethylene, polypropylene, cellophane, coated paper, laminated aluminum, etc. The temperature is controlled by an electronic temperature controller and the feed speed is adjustable. The distance between the welding and the edge of the bag is 10 mm. The distance (width) between the welding head and the conveyor belt is adjustable and is also adjustable the height of the conveyor belt relative to the floor. The machine is equipped with rotary solid ink marker and interchangeable characters (20 characters max height 5 mm.), The system works with inked rollers for easy handling and comes complete with photocell to make the marking at the desired point. Max weight of product:5 Kg Sealing width:mm. 10 Temperature set :0° - 300° Sealable materials:PP –PE-Coupled

Automatic strapping machine mod. JN85-R with reduced welding plate (width mm. 27 instead of the standard mm. 60) for the automatic strapping of products with small size. Special machine designed to avoid issues in strap releasing in case of strapping of profiles, beams and small packages. The launch of the strap is operated with the foot control or the button. The strap is tighten, heat-welded and cut. The holding capacity of strap depends on material type and on strap choice. Strap width:mm. 9 – 12 – 15 Strap thickness:mm. 0,5 - 0,65 Reel internal diameter:mm. 200 Power supply:380 V 3 phase Weight:190 Kg

DOUBLE CHAMBER STAINLESS STEEL VACUUM MACHINE WITH TRANSLATING HOOD FPHVC 820G - WITH ATM AND 100 m³/h PUMP Large vacuum packaging machine with two stations equipped with front and rear sealing bars, translating bell equipped with a comfortable handle and springs for weight balancing. Construction in stainless steel (AISI 304) with rounded shapes for easy cleaning, digital panel, vacuum gauge for constant vacuum control and 100 m³/h vacuum pump for a high packaging speed. The opposing sealing bars have a length of mm. 820 and the distance between the front bars and the rear bars is 700 mm. The machine is equipped with a gas injection valve (packaging in MAP). Number of sealing bars:2+2 front-rear Sealing width:mm 3x2 (two 3 mm parallel seals) Length of sealing bars:mm 820 Chamber dimensions:mm 910x800x225 Useful chamber dimensions:mm 820x650x180H pump:100 m³/h Working cycle:25- 30 seconds

TABLE MONOBLOC SEALER WITH MANUALLY OPERATED SEALING BAR AN INCORPORATED ROLL HOLDER The SP 600 is equipped with sealing bar with NI-CR wire for simultaneous cutting and welding of the film. Allows to obtain a polyethylene or polypropylene bag, perfectly welded and trimmed, using the normal fold film. Suitable for use in laundries, shirt factories, the textile sector in general, but is also suitable for the food sector for the packaging of the bread. Operation: Place the coil with the open side facing the operator Insert the open-film blade between the two flaps Unroll the film to the desired length Lower the sealing bar and cut the bag Enter the product in the bag and make the welding of the side remained open. Sealing bar length:600 mm Film reel max. width:600 mm Adjustable sealing time:0~2 sec